Sunday 17 February 2013

Trip to The Netherlands - again and the Delta HPE




I fancied a new daily driver, something reasonably sensible (well, as sensible as I'm ever going to get), rare, quick: A Lancia.
A little bit of a Summer break too, so off to Holland we went.

Although we flew there quite quickly It is also just an overnight ferry crossing from the UK and on the edge of mainland Europe.
The Netherlands roughly translates to 'Low lands' because 20% of the land is below sea level with some 50% being less than 1m above it. They are hemmed in by other countries so when they needed more land they had to re-claim it from the sea and marshlands. It is a very flat country which grows a lot of produce.
Because much of The Netherlands or Holland is below sea level they have to constantly pump water out otherwise it would quickly flood, sounds crazy, but they have made it work for a long time now.

The sea is held back by banks called Dikes, but it obviously seeps through, mainly underground.
It's currently pumped out by electric, but for many years it was done by windmills. Basically they split all the land up (this includes the fields, towns, small villages even housing estates) by small water courses. Even though they have a normal sized road system, in many areas you can also come out of your house, jump into a small boat and whizz off to see your friend a couple of blocks away.

Here is a model someone did of how the basics work:

Photobucket

There are (just) three windmills there, the one on the right pulls the water up from the lowest level, it goes around the water course until the one in the centre pulls it up onto the next level, then onto the the one at the left and so on until it's high enough to be pumped back to the sea.


You can see they are using water wheels, here's a working drawing:


Photobucket


Photobucket

This was eventually superseded by the Archimedes screw type:


Photobucket

Photobucket

They are now made from steel of course, but were first made from wood, one of the originals still exists - just about!

Photobucket

A current one:

Photobucket


Photobucket
Windmills were originally made from wood and this one is mainly apart from the brick outer and steel mainshaft, here is a shot looking up into the roof where you can see how horizontal motion is converted to vertical:

Photobucket

The wind comes from different directions and different speeds, to allow for these changes the keeper has to get out on the balcony to spin the whole top piece around to face the wind and put sheets behind the sails to catch it, the sails are just lats of wood, you can put a twist on them by tightening a rope.

Photobucket

Brief footage of it in action:





And the car? Delta HPE 16vt:

Photobucket

It has the same engine/turbo as the integrale Evo2 and shares its chassis/suspension with the Fiat Coupe (and other family members). As you can see it takes some styling cues (the wheels and arches) from its predecessor and is a pretty rare beast here in the UK with an estimated 7 others in the country.

The gearboxes final drive is lower than a Coupe and It's got a pair of C&B cams fitted along with a specially written chip running 1.3 bar boost, so quick enough on the road with the small turbo spooling up really early and the cams providing plenty of mid-range punch.
Sitting on fully adjustable coilovers it's also much lighter at the front than a Coupe giving it a very pointy and lively feel.

A car I really enjoyed owning and driving for a year, sadly now sold.






Search This Blog

About Me

My photo
Welcome to the Deltaparts Blog, here you will find, well, anything which is on my mind I guess, but mainly things to do with the Lancia Delta integrale and in particular anything to do with my business, Deltaparts. It will be a bit irregular as it's not every day (or even week) that something worth mentioning happens. I would like to try and make it interesting - at least to some people anyhow, but also hopefully accessible and readable for the average 'man on the street' so I won't bore you with loads of large words, bombastic overblown sentences or technical jargon. I will describe on here how lots of the parts that we sell came about as there isn't room on the website ( www.deltaparts.co.uk ) to explain. I hope you enjoy reading it as I do writing it, when something becomes a chore you know it's time to stop doing it....